The Ribbon Optical Fiber complie with or exceed the technical specifications in ITU-T G.657.A1/A2/B2. Optical Fiber G657A2 .
Model:Ribbon Optical Fiber G.657A2
GJBFJV cable is made by the tight buffer fiber wrapped with a layer of aramid yarn as strength member units.
Model:GJBFJV
The fiber complie with or exceed the technical specifications in ITU-T G.657.D /A1. Optical Fiber (G. 657. A1).
Model:Optical Fiber (G. 657. A1)
Low attenuation, dispersion and PMD, suitable for high bit-rate and long distance transmission.
Model:Optical Fiber (G. 652B)
The Single-Mode Optical Fiber G652D comply with or exceed ITU-T G.652D & IEC B1.3. specification.
Model:Single-Mode Optical Fiber G652D
Loose Buffered Fiber cable is produced as that fiber is sheathed by buffer material.The selection of top-quality fiber
Model:Loose Buffered Fiber
GJPFJV Break-out cable is made by the tight buffer fiber wrapped with a layer of aramid yarn as strength member units.
Model:GJPFJV Break-out
GJFJV 2-24 Tight indoor fiber optic cable is made by evenly applying strands of Aramid yarns or High strength glass yarns.
Model:GJFJV 2-24 Tight
GJSFJV SX Steel Wire fiber cable, ф900μm or ф600μm tight buffer fibers are wrapped a layer of flat stainless steel wires
Model:GJSFJV SX Steel Wire
GJSFJBV Duplex fiber cable, ф900μm or ф600μm tight buffer fibers
Model:GJSFJBV Duplex
GYTS Light-armored ,the fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.
Model:GYTS Light-armored
GYFFY Aerial put the fiber in the PBT loose tube,and two FRP as strengthen member.
Model:GYFFY Aerial